Chun-Li In Trouble - HueForge

Street Fighter character Chun-Li in a bit of distress.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA JAYO Black Transmission Distance: 0.3
PLA JAYO Gray Transmission Distance: 2.5
PLA KINGROON SKIN Transmission Distance: 3
PLA JAYO White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #12 (1.04mm) swap to Skin
At layer #20 (1.68mm) swap to White for the rest.