Straw Hat Skeleton - HueForge

A Picture of a skeleton with a straw hat on.

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA Geetech Dark Gray Transmission Distance: 3
PLA Geetech Gray Transmission Distance: 2.1
PLA Geetech Light Gray Transmission Distance: 0.7
PLA EryOne PLA+ IVORY WHITE Transmission Distance: 5
PLA BambuLab Basic White Transmission Distance: 9

Swap Instructions:
Start with Black
At layer #17 (1.6mm) swap to Charcoal Black
At layer #20 (1.68mm) swap to Dark Gray
At layer #23 (1.92mm) swap to Gray
At layer #27 (2.24mm) swap to Light Gray
At layer #30 (2.48mm) swap to IVORY WHITE
At layer #34 (2.8mm) swap to White for the rest.

Or you can go for 4 colors only:
Start with Black
At layer #20 (1.68mm) swap to Dark Gray
At layer #25 (1.92mm) swap to Gray
At layer #34 (2.8mm) swap to White for the rest.