The "Mount Phone Clamp" from "Modular Mounting System" by HeyVye is a little small, if you have insert you phone in a booklet phone case. So I enlarged the clamps a little bit. They are still compatible with the rest of the "Modular Mounting System".
How I Designed This
The steps of my approach have been as follows
- Download Mount_Phone_Clamp_201118.zip
Extract the files "Mount Phone Clamp A v6.stl" and "Mount Phone Clamp B v6.stl"
Load "Mount Phone Clamp A v6.stl" into [PrusaSlicer](https://www.prusa3d.com/de/page/prusaslicer_424/)
Cut the object into two parts on the z-axis 10.24 mm
Stretch the upper part from z=11.32 mm to z=20.77 without changing x and y
Export both parts in separate STL files
use [Tinkercad](https://www.tinkercad.com/) to rejoin the parts, with overlapping of 0.01 mm
Load the file "Mount Phone Clamp B v6.stl" into [PrusaSlicer](https://www.prusa3d.com/de/page/prusaslicer_424/)
Cut the object into two parts on the z-axis 5 mm
Stretch the top part from z=14.56 mm to z=25.57 mm without changing x and y
Export both parts in separate STL files
use [Tinkercad](https://www.tinkercad.com/) to rejoin the parts, with overlapping of 0.01 mm
optional: Let [PrusaSlicer](https://www.prusa3d.com/de/page/prusaslicer_424/) simplify the final mesh
You may can do cuting and stretching also within [Tinkercad](https://www.tinkercad.com/).
Category: Mobile Phone
Tags
The author remixed this model. Imported from Thingiverse.
Differences of the remix compared to the original
I enlarged the clamps a little bit. They are still compatible with the rest of the "Modular Mounting System".