CB radio antenna base mount

These mounts are clams to be used with a CB radio antenna base. I made them for my Albrecht Racer antenna, but they…
3
17
0
189
updated April 11, 2024

Description

PDF

These mounts are clams to be used with a CB radio antenna base. I made them for my Albrecht Racer antenna, but they may also fit other antennas.

V1

The clam consists of two parts that must be assembled using a 2.5mm nail and an M6 screw and nut. The 2.5mm nail is used as the hinge. The M6 screw and nut are used to create the force to hold the bracket in place.

V2

The bracket has two parts. One part (p1) is the main clamp and the second part (p2 or p3) is a plate that is pushed by an M6 screw to create the force to hold the clamp in place. You will need a screw of the correct length so that it does not interfere with your antenna connector.

Prevent Slipping

To prevent slipping, you need to add self-adhesive protective pads or something else with anti-slip properties. The two parts of the clamp are spaced accordingly.

Note

The print does not need support.

For better stability, choose your print material wisely (e.g. not PLA) and you may want to increase the amount of infill.

Category: Gadgets

Tags



Model origin

The author marked this model as their own original creation. Imported from Thingiverse.

License