{"data":{"model":{"id":"84045","slug":"wall-mount-for-avm-fritz-repeater-1200","name":"Wall Mount for AVM Fritz! Repeater 1200","authorship":null,"club":false,"excludeCommercialUsage":false,"price":null,"eduProject":null,"ratingAvg":"5.0000000000","myRating":null,"ratingCount":1,"description":"

The AVM Repeater is designed to be plugged directly into an electrical outlet, but I preferred to attach it to a wall and connect it with a power cord.
That's why I designed an alternate back cover.
Similar to the original, this back plane contains contact points for AC-current and additionally a strain relief for the power cord.

Besides a power cord, 4 (cylinderhead-)screws M3*5 and 4 square nuts M3 are required to attach and connect the cable. The original screws can be used to connect the back cover to the repeater.

I printed both pieces with Prusament PETG (urban grey). Most other filaments (PLA, ASA, ...) should do nicely.
The small clip was printed with a layer height of 0.10 mm in order to reduce the overhangs in the small semi-ellipse, the body was printed with 0.2 mm height. I also set the infill to 50% - there isn't much of it. Printing time was almost 4 hours for both peaces (MK3S+).

I'm adding the Fusion 360 file to allow for changes - if necessary.

Assembly:
BE SURE TO DISCONNECT THE POWER CORD DURING ASSEMBLY!
- remove the 4 screw from the old backcover with a 1.5 mm hexscrewdriver
- remove the original backcover
- thread the cable through the hole in the body, strip the ends of the powercord and better terminate these ends with wire end ferrules
- insert two nuts into the lower holes of the 'powerconnectionbank' (the middle elevation) and loosely fasten them with two screws
- put the stripped ends into the gap between the nuts and the plastic and tighten the screws (don't over tighten, it's plastic!)
- insert two nuts into the lower holes of the 'cablesocket' (the front elevation) and secure the cable with the clip and the other two screws
- make sure that the connection springs on the repeater stick out a bit
- place the new backcover above the repeater and fix it with the original screws

","category":{"id":"27","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","description":"Everyone loves smart gadgets. Use 3D printing to make amazing items for audio, photo & video, computers, and phones. Top models are ready to download for free.","__typename":"CategoryType"},{"id":"27","name":"Computers","nameEn":"Computers","description":"Tons of laptop and PC gaming 3D printable accessories and components of all kinds will amaze you. Make great projects with Raspberry Pi and other tech gadgets.","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2021-11-10T13:12:27.274529+00:00","firstPublish":"2021-10-29T16:12:14.229239+00:00","datePublished":"2021-10-29T16:12:14.229239+00:00","dateCreatedThingiverse":null,"nsfw":false,"summary":"Mount Fritz! Repeater 1200 on the wall instead of plugging it into a socket","likesCount":8,"makesCount":1,"liked":null,"printDuration":null,"numPieces":0,"weight":null,"nozzleDiameters":null,"usedMaterial":null,"layerHeights":null,"mmu":false,"materials":[],"dateFeatured":null,"downloadCount":87,"displayCount":1165,"filesCount":3,"privateCollectionsCount":7,"publicCollectionsCount":4,"pdfFilePath":"media/prints/84045/pdfs/84045-wall-mount-for-avm-fritz-repeater-1200-ce534848-3a4c-4a73-8f4f-aea7fddb4967.pdf","commentCount":1,"userGcodeCount":0,"remixCount":0,"canBeRated":false,"printer":null,"image":{"id":"468564","filePath":"media/prints/84045/images/896752_09d1f077-5b0f-4126-8a06-a7d83095b75c/20211029_164013310_ios.jpg","rotation":0,"imageHash":"pQgKFYLKhGl/l3d2h5d4iHlgmgem","imageWidth":3246,"imageHeight":2251,"__typename":"PrintImageType"},"images":[{"id":"468564","filePath":"media/prints/84045/images/896752_09d1f077-5b0f-4126-8a06-a7d83095b75c/20211029_164013310_ios.jpg","rotation":0,"imageHash":"pQgKFYLKhGl/l3d2h5d4iHlgmgem","imageWidth":3246,"imageHeight":2251,"__typename":"PrintImageType"},{"id":"477123","filePath":"media/prints/84045/images/913817_8b63f77f-1cec-42e9-b95b-216b2410ca84/20211029_073648387_ios.jpg","rotation":0,"imageHash":"pBgSFoSalHp/iXd5lodniHeIu3C6C5c=","imageWidth":1862,"imageHeight":1473,"__typename":"PrintImageType"},{"id":"468554","filePath":"media/prints/84045/images/896727_98e8404c-11fe-45aa-b6b4-2d581c3e9cf8/3.jpg","rotation":0,"imageHash":"JAgGE4J/iHh4d4h39WRPT+Y=","imageWidth":1649,"imageHeight":784,"__typename":"PrintImageType"},{"id":"468565","filePath":"media/prints/84045/images/896753_91e703dc-f900-4393-8de4-7e3a2f257930/20211029_152225380_ios.jpg","rotation":0,"imageHash":"XwgGLQZlv3Z2Zr1Dl4tXmKp3r4r4","imageWidth":2268,"imageHeight":2999,"__typename":"PrintImageType"},{"id":"468555","filePath":"media/prints/84045/images/896728_1027a2db-49cd-4b41-8256-123dac219ef1/4.jpg","rotation":0,"imageHash":"nwgKDgKcqPhpd8eHd2aHd3m3Te2flP0=","imageWidth":2268,"imageHeight":2761,"__typename":"PrintImageType"},{"id":"468556","filePath":"media/prints/84045/images/896729_c79de420-adbd-4434-93bf-2b1b4e9e4981/5.jpg","rotation":0,"imageHash":"nhgGHwQ0X4+KlIi2WzeYl5mDl1/4+YUP","imageWidth":2268,"imageHeight":2333,"__typename":"PrintImageType"}],"tags":[{"name":"wall","id":"76","__typename":"TagType"},{"name":"mount","id":"469","__typename":"TagType"},{"name":"fritz","id":"21049","__typename":"TagType"},{"name":"avm","id":"21050","__typename":"TagType"},{"name":"repeater","id":"48042","__typename":"TagType"}],"thingiverseLink":null,"filesType":null,"previewFile":{"id":"371323","filePreviewPath":"media/prints/84045/stls/896730_a2bfb147-662f-4350-ae86-b591b8151aae/body_preview.png","__typename":"STLType"},"license":{"id":"3","disallowRemixing":false,"__typename":"LicenseType"},"remixParents":[],"remixDescription":null,"__typename":"PrintType","user":{"id":"152341","handle":"tto_152341","verified":false,"publicUsername":"tto","avatarFilePath":"","badgesProfileLevel":{"profileLevel":9,"__typename":"BadgesProfileLevelType"},"__typename":"UserType","isFollowedByMe":false,"canBeFollowed":true,"billingAccountType":"personal","lowestTierPrice":null,"highlightedModels":{"models":[{"id":"85107","name":"Mini Angle for Woodworkers (updated)","slug":"mini-angle-for-woodworkers-updated","ratingAvg":"4.0000000000","likesCount":99,"liked":null,"datePublished":"2021-11-04T15:47:29.142321+00:00","dateFeatured":null,"firstPublish":"2021-11-04T15:47:29.142321+00:00","downloadCount":482,"mmu":false,"category":{"id":"49","path":[{"id":"48","name":"Hobby & Makers","nameEn":"Hobby & Makers","__typename":"CategoryType"},{"id":"49","name":"Tools","nameEn":"Tools","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2021-11-17T08:13:54.080558+00:00","image":{"id":"480137","filePath":"media/prints/85107/images/920028_d0e803d1-6352-4875-af35-02008db36079/title.png","rotation":0,"imageHash":"YwgKFYKWeoaTZoiAiFh4lXLAOwqZ","imageWidth":1064,"imageHeight":801,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"152341","handle":"tto_152341","verified":false,"publicUsername":"tto","avatarFilePath":"","badgesProfileLevel":{"profileLevel":9,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"87240","name":"Multilayer Spare Sheet Holder","slug":"multilayer-spare-sheet-holder","ratingAvg":"5.0000000000","likesCount":38,"liked":null,"datePublished":"2021-11-18T10:26:20.244376+00:00","dateFeatured":null,"firstPublish":"2021-11-18T10:26:20.244376+00:00","downloadCount":205,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2021-12-28T09:10:41.313010+00:00","image":{"id":"481479","filePath":"media/prints/87240/images/922924_d8ff4bad-0c12-446e-a288-00bc8b8150c2/title.png","rotation":0,"imageHash":"3ygOHISYiHdvd4h+dnmqgKoLqA==","imageWidth":8400,"imageHeight":4725,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"152341","handle":"tto_152341","verified":false,"publicUsername":"tto","avatarFilePath":"","badgesProfileLevel":{"profileLevel":9,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"84045","name":"Wall Mount for AVM Fritz! Repeater 1200","slug":"wall-mount-for-avm-fritz-repeater-1200","ratingAvg":"5.0000000000","likesCount":8,"liked":null,"datePublished":"2021-10-29T16:12:14.229239+00:00","dateFeatured":null,"firstPublish":"2021-10-29T16:12:14.229239+00:00","downloadCount":87,"mmu":false,"category":{"id":"27","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","__typename":"CategoryType"},{"id":"27","name":"Computers","nameEn":"Computers","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2021-11-10T13:12:27.274529+00:00","image":{"id":"468564","filePath":"media/prints/84045/images/896752_09d1f077-5b0f-4126-8a06-a7d83095b75c/20211029_164013310_ios.jpg","rotation":0,"imageHash":"pQgKFYLKhGl/l3d2h5d4iHlgmgem","imageWidth":3246,"imageHeight":2251,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"152341","handle":"tto_152341","verified":false,"publicUsername":"tto","avatarFilePath":"","badgesProfileLevel":{"profileLevel":9,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"86459","name":"Jabra Speak 510 Wall Mount","slug":"jabra-speak-510-wall-mount","ratingAvg":"0E-10","likesCount":8,"liked":null,"datePublished":"2021-11-12T07:48:54.045879+00:00","dateFeatured":null,"firstPublish":"2021-11-12T07:48:54.045879+00:00","downloadCount":51,"mmu":false,"category":{"id":"29","path":[{"id":"3","name":"Household","nameEn":"Household","__typename":"CategoryType"},{"id":"29","name":"Office","nameEn":"Office","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2021-11-12T10:09:24.042760+00:00","image":{"id":"478312","filePath":"media/prints/86459/images/915928_982fb9e3-4945-4339-8106-26836a85cc61/20211112_073345262_ios.jpg","rotation":0,"imageHash":"GwgOBoD5uItcaIeKlmWIiHeH+UafG/Y=","imageWidth":2268,"imageHeight":1886,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"152341","handle":"tto_152341","verified":false,"publicUsername":"tto","avatarFilePath":"","badgesProfileLevel":{"profileLevel":9,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"86589","name":"Spoolhub with Bearing and Customizable Diameters","slug":"spoolhub-with-bearing-and-customizable-diameters","ratingAvg":"4.5000000000","likesCount":7,"liked":null,"datePublished":"2021-11-13T15:48:51.344739+00:00","dateFeatured":null,"firstPublish":"2021-11-13T15:48:51.344739+00:00","downloadCount":35,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2021-11-14T11:48:18.357431+00:00","image":{"id":"479273","filePath":"media/prints/86589/images/917839_cb1fcaeb-a47a-4005-8e77-11aa28e1ab14/title.png","rotation":0,"imageHash":"3xgKFoKIim1thnifdvZlaZiI/JKbDqo=","imageWidth":1363,"imageHeight":1104,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"152341","handle":"tto_152341","verified":false,"publicUsername":"tto","avatarFilePath":"","badgesProfileLevel":{"profileLevel":9,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"85400","name":"Upside Down Stand for MK3 with Multiple Mounting Options","slug":"upside-down-stand-for-mk3-with-multiple-mounting-o","ratingAvg":"5.0000000000","likesCount":6,"liked":null,"datePublished":"2021-11-07T11:47:28.938944+00:00","dateFeatured":null,"firstPublish":"2021-11-07T11:47:28.938944+00:00","downloadCount":21,"mmu":false,"category":{"id":"40","path":[{"id":"1","name":"3D Printers","nameEn":"3D Printers","__typename":"CategoryType"},{"id":"40","name":"Accessories","nameEn":"Accessories","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2021-11-11T12:19:16.657370+00:00","image":{"id":"474144","filePath":"media/prints/85400/images/907920_d6084589-51ca-4860-bf6b-20a11ce108ab/title.jpg","rotation":0,"imageHash":"nBgGJYTPSmlVd4icdYh4qoRgWgi3","imageWidth":2666,"imageHeight":1963,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"152341","handle":"tto_152341","verified":false,"publicUsername":"tto","avatarFilePath":"","badgesProfileLevel":{"profileLevel":9,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"},{"id":"462425","name":"Twist Stopper for Sigma 150-600 C (and other lenses)","slug":"twist-stopper-for-sigma-150-600-c-and-other-lenses","ratingAvg":"5.0000000000","likesCount":5,"liked":null,"datePublished":"2023-05-12T14:33:49.096178+00:00","dateFeatured":null,"firstPublish":"2023-04-25T10:07:00.398057+00:00","downloadCount":48,"mmu":false,"category":{"id":"26","path":[{"id":"21","name":"Gadgets","nameEn":"Gadgets","__typename":"CategoryType"},{"id":"26","name":"Photo & Video","nameEn":"Photo & Video","__typename":"CategoryType"}],"__typename":"CategoryType"},"modified":"2023-05-12T14:33:49.111858+00:00","image":{"id":"1812969","filePath":"media/prints/462425/images/3793859_3577b18c-d88f-4c39-8af1-451e169f6870/sts03.png","rotation":0,"imageHash":"HPgJRYqPlphhh4h7hqaHdYZweAh3","imageWidth":1592,"imageHeight":1203,"__typename":"PrintImageType"},"nsfw":false,"club":false,"price":null,"user":{"id":"152341","handle":"tto_152341","verified":false,"publicUsername":"tto","avatarFilePath":"","badgesProfileLevel":{"profileLevel":9,"__typename":"BadgesProfileLevelType"},"__typename":"UserType"},"latestContestResult":null,"__typename":"PrintType"}],"featured":false,"__typename":"HighlightedModelsType"},"designer":false,"stripeAccountActive":null,"membership":null},"contests":[],"contestsResults":[],"latestContestResult":null}}}

Wall Mount for AVM Fritz! Repeater 1200

Makes Add make

Comments

Makes