IKEA Skadis Dremel Mount

IKEA Skadis print in place Dremel hand tool mount.  Tested with Dremel 8260 and should work for other models as well.  Tight fit with Skadis and is best printed using PLA, PLA+, or PETG.

Print Info for Creality Ender 3 S1 Pro  & CURA

Layer Height: 0.2mm
Line Width: 0.4mm
Infil Density: 20%
Speed: 80mm/s
Support: None
Build Plate Adhesion: None or Skirt.  You can also use Brim but you will need a deburring tool to remove it.

Approx Print Time: 60min
 

Happy Printing :)