Geometric Wall Bear Art

A bear face in geometric style for your wall.

All pieces print individually and mount on the base board so that you can easily change the colours with any printer. There is a handy guide to show what pieces go where. Pieces labelled ‘a’ go on the left and pieces labelled ‘b’ go on the right.

I would suggest gluing the pieces in place after you have printed them all to prevent any wobbles, but it's not required.

Don't force the pieces onto the base too hard. If you're having trouble, warm up your 3d printer base, place the piece on the printer base for 5 minutes, and then try putting the piece on again. The softer plastic should click on nicely.