Lifepod 2.0 Sig P365 with 3 mags

Keep the model face down on V1.   The unit is orientated to allow use of unique finish build plates like diamond or carbon fiber to add a pattern. 

The design was done to be tight for the pistol to allow for very little movement. 

Also the complete extrusion allows for the use of the thin stock foam between the lid/printed holder for better protection and to further limit movement.  Also allows use of the thin foam underneath the insert. 

4-15-24 Uploaded a V2 with chamfered/Filet edges all around.  Added a 45 edge at the  magazine holders to allow for finger extensions on the mags and added the SIG logo. Looks like this version will print best face up with supports, will give the best front finish, back may be a little rough but that will not be seen. I have test printed this version.

If you download and print my model please like and review! If you want a model for another different weapon, message me and I can design it! 

Used Fusion 360 with a vector sketch for the P365 and did  sketches that serve for the mag storage.

Only fits 10 round mags .

4-15-24 Uploaded a V2 with chamfered/Filet edges all around.  Added a 45 edge at the  magazine holders to allow for finger extensions on the mags and added the SIG logo. I have test printed this version.