Universal Compass - Print-in-place

Add a pen. Put the screws.

Use the middle screw to lock/unlock the compass. You don't need to overtight the screw to lock the compass. A short pressure should be enough.

2 versions :

• Plastic point : 100% printed compass. 

Use a small file to make a sharp point but it remains a plastic point.

• Metal point : if you want a more precise compass, use this one.

 You will need to cut the point of a pin and insert it in the small hole. This version has an articulated point protector to avoid holes in pockets and cases.

Print Settings :

• Printed on MK3S
• Filament tested : PLA - PETG
• Nozzle 0.4mm : 0.20mm tested
• Scale : 100% (PLA) and 130% (PETG) tested 

Use this compass lightly, don't overtight the middle screw and you will draw very precise circles !