Flightradar24 Raspberry Pi Zero W with Jetvision DVB-T case

Updated 20/Nov/21:

I've moved the power insert to the left wall so now, there's no need to use an L-type microusb adapter. Also, I've updated the box's corner screw holes to fit M3, and made several fixes to the desing.

I think this could be the final version, but I have not printed it yet.

Updated 27/Aug/21:

I've modified the files to fix the issues from previous version and made the box 5mm shorter. I've also modified the power insert and hole to 4.2 mm of diameter to fit wider usb cables (most cables fit 4mm but added some extra space). Added some vents and cable ties holes at the bottom to fix the dongle to a steady position.

I have not printed this version yet, because I ordered a smaller OTG adapter from Amazon (mine is a little bit old and chunky) and the length of the box might change. But this could work for you if you want to give it a try.

Updated 24/Aug/21:

Today I printed it for the first time and I suggest you to not printing it yet. There are some issues that need to be fixed, like the space for the OTG Cable and the Z size of the box is still very tall, so I need to fix this to avoid spending too much filament.

Publish date 17/Aug/21:

This a remix from Rkimell73 (https://www.thingiverse.com/Rkimmell73) for the JetVision DVB-T receiver which works for the Flightradar24 ADS-B receiver in which I modified the hole for the antenna connector, moved the Raspi position and added some vents for the dongle on the base.

Still a work in progress. I will be publishing updates after my first print. Stay tuned.

Print Settings

Printer Brand: Creality

Printer: Ender 3 V2

Rafts: No

Supports: No

Resolution: 0.28

Infill: 25

Filament: Inland PETG Orange