To make printing a little easier I renamed most things and started using abbreviations for shorter file names, but they're easily explained:
Alouttinae | Hand Cannon | Machine Cannon | Railgun | |
Armor | A13-A | HC-A | MC-A | R-A |
Frame | A13-F | HC-F | MC-F | R-F |
You need to use the extended limbs from the ‘A13-F Limbs Runner’ aside from that use the basic frame. The rest is basically the same as the original Dummy13:
Material | Frame | ABS, ASA, or PETG |
Armor | Any | |
Layer Height | First | 0.2 mm |
Other | 0.15 mm | |
Infill | 20% gyroid/grid | |
Walls order | Outside to inside (Cura)/Print external perimeters first (Prusa) |
The whole backpack was redesigned which you can read more about and get here. It requires to print the ‘A13-A chest v2’ among the B-F 'Backpack v2'.
Generally the newer Chest features a better connector, securing it better to the chest, removing wobble from Back Addons and making the A13 less back-heavy.
v1.5a (12.04.24):
v1.5 (12.04.24):
v1.2 (11.04.24):
v1.1 (10.04.24):
v1.0 (09.04.24):
v0.9 (06.04.24):
The author remixed this model.
I remixed it by adding a few different models together and edited them to make them print easier. I fixed some mesh issues within the runners and added all of them all to two runners to guarantee better printability and added custom AIO versions (with two different variations) for convenience. All Parts were converted to stl's, renamed for better understanding, reoriented for better printability and sorted accordingly.