Furniture handle

A simple and minimal furniture handle / knob with a modern look and feel.
It's supposed to serve its purpose without screaming in your face about its existence but instead adapt and flow into surrounding shapes.

I recommend printing it on its side for maximum strength in the pulling direction, though you will need good bed adhesion or use a brim or raft.
I also recommend printing the more visible side facing up, as the front has a slight corner radius that will come out much rounder and cleaner on that side.
The handles in the pictures were printed with Prusa Galaxy Black, 0.15mm layer height, no support and on their side.

The handle has a length of 60mm, a door thickness of 18mm and a stickout of 20mm.
The screwholes are spaced 15mm from the sides and 10mm from the bottom (center line).

It is also somewhat parametric (in onshape) to fit your needs. The door thickness, width/length and stickout depth can be configured.
I've also attached a STEP file for people that don't want to use onshape.

Original Onshape document can be found here: Furniture handle

Shape and proportions are loosely based on the original model. Front facing corner got chamfered and handle was stretched a bit wider.