Geometric Earth Wall Art - No MMU Required

Below are color swap instructions, if you dont want to deal with it download the 3MF file for the color swaps set at the appropriate layers. 15% Infill covers just fine.

• In Prusaslicer import the STL.
• Locate the vertical layer bar on the right after slicing the model

• Drag the top arrow down to the layer you want and press the + sign

• Click the plus on the following layers to achieve the desired print
• Blue 0 mm - 2.2 mm. Click + at 2.2mm
• Black 2.2mm - 3.2mm. Click + at 3.2mm
• Brown 3.2 mm - 5.2mm. Click + at 5.2mm
• Black 5.2mm - 6.2mm. Click + at 6.2mm
• Green 6.2mm - 8.2mm. Click + at 8.2mm
• Black 8.2mm - 9mm.

                                                      When you are done it should look like this

To change the colors of the preview just right click the sections and select a color.

For the bottom most color click the color square in the top right under filament and select a color.

ENJOY!