Top cover for "Xiaomi Smart Air Purifier 4"

A simple top cover for the "Xiaomi Smart Air Purifier 4".
16
52
0
395
updated April 15, 2024

Description

PDF

I made a simple top cover for the “Xiaomi Smart Air Purifier 4”.  
Since the device is open at the top, dust and small items can fall in there and cause harm.  
This lid/cover doesn't ‘click’ into place, it just lays on top of the unit. An additional ‘lip’ around prevents it from sliding off.   
 

The size is ~260x260mm, so you'd need a bigger printer if you want to print it laying flat on the bed (recommendable). 
I used an additional brim when printing to make sure nothing lifts off the plate.  

You could also place it standing vertically and orientate it diagonally across the bedplate, then you can print it with a regular sized 220x220mm printer.  
In this case you'd have to use supports though, because of the ‘lip’ around.  
I didn't try to print it this way myself, but theoretically speaking it should work.  

I also added a file named ‘cornertest’, so you can try to print it standing vertically and see if it might work out when using supports.  
You can also print this cornertest if you own a different model to see if this lid might fit.   


Check out my comprehensive infosites if you own any of the following Anycubic printers:  
- Kobra Go or Kobra Neo: https://1coderookie.github.io/KobraGoNeoInsights/   
- Kobra 2: https://1coderookie.github.io/Kobra2Insights/  
- Kobra 2 Neo: https://1coderookie.github.io/Kobra2NeoInsights/ 
- Kobra 2 Pro: https://1coderookie.github.io/Kobra2ProInsights/  
- Kobra 2 Plus: https://1coderookie.github.io/Kobra2PlusInsights/  
- Kobra 2 Max:  https://1coderookie.github.io/Kobra2MaxInsights/  

Tags



Model origin

The author marked this model as their own original creation.

License