th3d led Bambu Labs X1 Carbon Light strip clip

Light strip clip that moves the lights towards the plate for better illumination.  Easy to print.  Lights are angled up 40 deg.    Clips push on the sheet metal in the printer by the print head.  Movable and reconfigurable but stay secure.  PETG recommended.  Print with the led mount face on the print bed with no support.  

It is recommended to mount the lights over the front door and on the sides, not the back.

https://www.th3dstudio.com/product/bambu-p1-p1s-lighting-upgrade-kit/

The lights with this setup do not appear to cause any issues with LIDAR or the self calibration.

*Though the original design worked just fine, the lights have been angled up 5 deg for more clearance to the tool head.

Wires are routed along the perimeter and along the front of the machine to the led light connector inside the machine, located generally behind the LCD.