Super Clamp

"If something is worth doing, it's worth overdoing." -Homer Simpson, et al. Probably spent 50+ hours designing this camera clamp so I could mount a $10 web camera. Biggest hurdle was learning how to design consistent 3D printed mechanical threads that work together and are interchangeable with standard real metal fasteners. The clamp has 1/4"-20 and standard 3/8"-16 threaded tripod mounting holes on the back side away from the jaws. I also designed 1/4"-20 camera mount/holder for a Sony Play Station (PS3) Eye Camera. See my other designs...

Print Settings

Printer Brand:

Prusa

Printer:

i3 MK2S

No

Supports:

No

.15 mm

Infill:

30%

Notes:

Used NinjaFlex green flexible filament for the gripper pads.
Used Sunlu Gray PETG for the screw and round nuts.