Werner fiberglass ladder tool caddy

A convenient little box that clips into one of the holes on a Werner step ladder.
12h 30m
1× print file
0.30 mm
0.60 mm
453.00 g
2
17
0
189
updated April 7, 2024

Description

PDF

There's only so much space at the top of the ladder for tools, so I decided to make a box that clips into one of the existing holes in the top of ladder.

Werner has updated the top plastic part of their fiberglass ladders and now has a system for attaching various Werner accessories. Check the included photo to see if you have the same top piece that I have, which this was designed to work with.

Hope you find it useful and please rate/post your make.

Print instructions

I printed it in PETG using a .6 mm nozzle, .3mm layer height, 2 perimeters, 15% infill and 5 top/bottom solid layers. A .8mm nozzle would speed up the print time if you have one. It does need supports since there is no orientation that can be used to avoid it. When I uploaded the .stl it placed it on it's side. Print upright and use paint on supports for the area sticks out from the box.

 

 

Tags



Model origin

The author marked this model as their own original creation.

License