Just unbelievable how the mouth halves fit together so perfectly. Had no idea what I'd do if the 2nd half was pushed in but didn't fit properly. But, as always, Steves models are perfect. Cheers from Oz

KROSS

@KROSS

The scourge of Tasmania. Printed in resin and finished with Createx and Vallejo paints.
The mouth was a challenge even with the thinner set of parts. I ended up cutting them mouth pieces horizontally so I had 4 pieces. Everything fit great then. The teeth can be a challenge, just make sure you separate the top from the bottom and keep them in order. I went from left to right. Take your time while gluing and they’ll fit in ok. Great model, everyone who sees it wants it.

20

reddadsteve

@reddadsteve

Sorry about the mouth, but good to hear you got through it.

Beautiful post processing on the model. as expected from you.

Thank you for adding helpful comments for other makers and taking the time to post your make.
Teamwork, Steve

14

Rallyped

@Rallyped_1544026

7

PeterG

@PeterG_529568

swirl printed in clear petg, the model is so nice!!! all in 0.15

7

StCyr

@StCyr_3581972

The make was nice, it was all beautifully fitting until we got to the mouth, the pieces didn't seem to fit properly, had to Sauder it down and then the teeth didn't fit properly after some modifications it turned out really nice though!

20

reddadsteve

@reddadsteve

A few people had issues with the mouth. It's usually tied to a fat first layer or slightly over extrusion on the face. Either way, I've created a 'thinned' mouth for those makers. Never hesitate to reach out to me if you have a problem with my models.
Thank you for taking the time to post your make and add helpful comments for other makers.
Teamwork, Steve

6

unikourn

@unikourn_4018770

@reddadsteve where can i find the "thinned" version of the mouth. I'm having a bear of a time... thanx in advance.

View one more comment

Sehr schönes Modell

Great print.
Thank you for posting your make on multiple download sites.
Teamwork, Steve

12

Albuqshutterbug

@Albuqshutter_3343797

Some challenges with setting the teeth and whiskers but really nice final product.
Thanks again for making these available.
Tweety and Sylvester are next. 😆

9

Dudette72

@Dudette72_2871869

Another one ticked off the list!

12

marci

@marci_97139

Another friend! I love it! Thank you!

10

Matt Hewitt

@MattHewitt_1397360

Finally circling back to a couple more Looney Tunes characters..

As popular as Taz is, he has never really been a favourite of mine. This model, however, is so very cool and was an absolute pleasure to print and put together.

It will make a really great addition to my extensive collection of "Steve's" 🤣

Thank You!

20

reddadsteve

@reddadsteve

It's always good to see your posts and hear from you. Display space! We all run out of display space all too soon, so choose you models wisely.
Thank you for your ongoing support.
Teamwork, Steve