TwistBloom Fidget Pen: Write, play, decorate

Introducing the TwistBloom Pen

This pen features a flower-shaped design with a threaded stem and base, allowing it to effortlessly twist and lock itself into its accompanying vase. With just a gentle twist and the force of gravity, the pen elegantly screws itself into place. To pull it out, grab it by the leafs and let gravity unscrew the base. Then, lock the leafs on top of the pen against the flower to prevent them from moving down while you're writing.

Not just a writing tool, the TwistBloom pen doubles as a fidget toy, perfect for relieving stress and boosting creativity.

Materials needed:

You will only need the ink chamber and tip of a standard BIC crystal pen

Recommendations:

Make sure to remove any leftovers from the brims or any burr created during printing. Shinier filaments seem to create less friction on the threads and they work better overall. Sometimes it may need a small twist to screw/unscrew properly into place

If you wish to support this project you can donate via Ko-Fi

Remember that this file is for personal use only - Commercial licenses are available in our Patreon

Print settings:

• 0.2mm layer height 
• Brim recommended for the pen as it is printed vertically

Happy printing!