OpenScan - 3D Scanner v1

DIY Scanning Rig to capture photos automatically

For more details on the scanning setup, you might want to visit http://www.openscan.eu

all parts have been printed with the following settings:

• skirt
• 50mm/s outer wall
• 70-100mm/s rest
• first layer 0.2mm !!!

• all other layers 0.3mm no support needed (besides file 08 and 09)

  I will update a detailed build-description as soon as possible. If you are happy with the design, I would appreciate any feedback and if you'd consider a small tip to support this work and further developement :)