Hello i use this holder, i little adjust holes pitch to fit wurth tool wall also i rotated the tool position.
Recomend print from PETG 10%infill
I mount it on this: https://eshop.wuerth.cz/Kategorie-produktu/Zakladni-deska-system-derovanych-desek/31462007130101.cyid/3146.cgid/cs/CZ/CZK/
To mount i use this https://www.printables.com/cs/model/830149-tool-holder-for-square-perforation-base-plate-wurt and screw 4mm
The author remixed this model.
Slightly modified hole spacing to fit wurth tool wall.