BMZ Norco e-bike charger wall mount

Nothing special for print settings. 

I used PLA @.2mm layer height in a Bambu P1S set to fast speed with automatic normal supports; printed in the same upright position as it would be when mounted to the wall. I used 3 walls and 20% infill. I only used PLA because I wanted a specific color and had it in PLA. I'd suggest something a bit stronger if you have it such as PETG, ABS, ASA,PC…

Same as DRtob's file but with the added hanger on the side of the mount to hold the end of the cable and keep it off the ground when not in use. This add-on fits the cable end used on Norco e-bikes, at least it fits a 2023 Norco Sight VLT.