Drybox bar with mount

A set of elements for mounting a filament spool inside a drybox, Designed for Rotho Loft 3.2l box, but you can easily resize the bar to fit other types of similar boxes. The 3.2l box should fit most small spools (250-300g).

Put some silica gel on the bottom of the box to keep the filament dry during printing. It is especially important for TPU, ABS/ASA and nylon.

Print settings

Print the elements in the provided position. The mount needs to be printed twice.

Post-printing

Use four 4mm flathead screws to secure the mounts on each side of the box - they should screw directly into the holes in the plastic mounts. Use a standard bowden connector to guide the filament out of the box.

Category: 3D Printer Accessories