Airbrush booth adapter adapter for MAS B3000

This print is a fairly simple collar. The large side is mean to fit inside the 90 degree booth adapter, and the small side will fit outside the main connection. The fit is snug enough that glue is optional, and filets are provided on the interfacing edges to ensure a smooth insertion.

Particularly if you are gluing, make sure you align the large openings with the two side slots.

Important print settings:

Material: Any.

Walls: 2

Supports: Yes. Align the part so the large side is on the bottom, and use snug or another preferred support style. This will ensure that the scarring will be entirely hidden.

Printed with a Bambu X1C.

First, a big thanks to Termiman's Airbrush Booth Adapter.

This piece can be used to modify the central collar, reducing it to 98.45mm (~3.876in). This will allow you to connect it to a 100mm/4in fitting, such as found on the B3000 booth.  

It is intended for use with Termiman's original print.