SV06 y axis 48mm stepper adapter
This model is made to offset the mounting bracket a little to the right so that you can mount a stronger y-axis motor.
0
13
0
150
updated April 3, 2024
Description
PDFNo inserts are needed, use original screws.
You will need extra 4pcs of M4x15mm screws at least. you could go longer than 15mm.
No supports, 0.2, as much infill as possible. thick walls.
PS. Zip ties in the pictures are not needed at all. I just put them in for extra precaution.
Tags
Model origin
The author marked this model as their own original creation.