Chenbro RM42200 360 radiator, fan or AIO mount

Remix of BoA's model to make some changes to fit the EK AIO cooler.

How to choose original or remix:

If you are using for fans on an air-cooled build,  use the remix, because of the eliminated airflow cutouts.  I also recommend gluing the 2 halves together in this case.  (when you use a radiator, the radiator provides some structure,  the fans alone would not provide as much strength, so you should glue)

If you are using an AIO or radiator, measure the distance from the radiator mount holes to the ends of the radiator and compare to the drawing.  If one is appropriate for your application, use that one.  

If neither fit, then you can still use this design.  Use the reverse mount(marked as "mirror") versions of the STL of the remix.  This will allow the mount to be installed backwards and the radiator can be mounted on the flat surface.  

Adjusted cutout and mounting locations for the EK-Nucleus AIO CR360 Dark.

Adjusted mounting holes to be used with M3 brass heat set inserts

Removed airflow cutouts to minimize backflow.  A cable passage was maintained.

See drawing image for detail