Mini tripod, comes in 3 leg heights (85, 100, 120mm) . Rotate ring to adjust height/leg spread
Requires:
3 - M3 16mm socket head screw
1 - ¼ ½ inch bolt
Optional:
Foam sheet to improve grip when handheld or reduce slipping, use cutting guide
Printed with PETG at 0.15/4 walls/30% infill, clear holes before assembly
Note: gaps at the leg hinge points are at 0.1mm, to prevent/reduce walls getting stuck calibrate your flow settings, I set mine to 95%.
The author marked this model as their own original creation.