VW Pointer/Gol G3 Licence Plate Light (Large Single Light)
Description
PDFThis is a close a copy as I could make of the original part.
The VW part number is: 377 943 021 A
The main housing is made from ABS and the Lens is made from TPU in this case since it was the only transparent filament I had at the moment. I would definitely recommend printing the lens in some other rigid material instead. The lens has to be glued to the main housing in order to create the original weatherproof seal. It also requires the original sized o-ring in between the housing and the bulb holder.
This is from a 2001 VW Pointer (Mexico's name for the VW Gol)
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK4
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
15%
Filament: HatchBox ABS Black
Notes:
If using the standard halogen bulb, I recommend ABS or a similar high temperature material. If using LED, might be able to use other materials.
Tags
Model origin
The author marked this model as their own original creation. Imported from Thingiverse.