Wheels with Bearings for Formula 1 Kit Card by Mouchiccc

Print in place bearing wheel made to be printed for a 200% Formula 1 Kit.  https://www.printables.com/model/808569-formula-1-kit-card  Print 4X of the wheel model for a full set. You may need to use a pick or something to free up the bearing at first in case your printer isnt dialed in. You may want to print one at first and adjust your Slicing Tolerance setting to get it working right. I also used a little bit of model train lube on the bearings.  If you want to print this for the original 100% scaled model which was only 3" long you will likely need a 0.1 - 0.2 nozzle. 

Merged a printable 688 bearing by flyrika into the wheel hub of the Formula 1 Kit by MM. Made to be printed for a 200% Formula 1 Kit. If you want to print this for the original model which was only 3" long you will likely need a 0.1 - 0.2 nozzle. Also added a ridge to the outside to grip the rubber tire better, and edited the cutout for the car axle peg as stock the cutout isnt quite big enough.