Hex Shaft Spacer Optimized for 3D Printing

Spacers for 1/2", 3/8" and 5mm hex Shaft. 

These parts were designed with 3d printing in mind. They are optimized for fast printing and to avoid possible tolerances problems. 

I included the SETP and STL files for the most common sizes available from FRC and FTC vendors. If you need a custom size, I also included the SolidWorks 2023 file for easy editing.  

Recommended printing parameters: 

• Nozzel: 0.4mm 
• Layer height: 0.2mm 
• Perimeters: 3 
• Brim: Outer brim only 
• Brim width: 1.2 to 2.4mm 

Any doubt, comment or suggestion, don't hesitate to let me know.