(Un)original Prusa Dry Box M10 Allen Screw
To use the standalone versions of the A and F beams with your dry box, but the openings are not currently needed.
5
38
1
236
updated
April 1, 2024
Description
PDFM10 Allen screw with hole for a 4mm Allen key for the standalone versions of the A and F beams of the (un)original Prusa dry box.
To mount the screws in the holes, apply a small amount of silicone grease to the threads so that they run smoothly.
Recommended print settings are 3 walls and 100% infill. Or just use the 3mf file.
The model was created with FreeCAD 0.21.2.
Model origin
The author marked this model as their own original creation.