Outlet Cover With Shelf Horizontal Lip

This is a remix of a horizontal outlet cover with shelf that was a remix of a vertical outlet cover with shelf. In my remix, I've added a lip to the shelf to prevent things from falling off if clipped in passing. My outlet happens to be at waist height in a high traffic area and so the lip was necessary to prevent outrage in the future.

Support Settings for Cura

• Generate Support: Checked
• Support Structure: Normal
• Support Placement: Everywhere
• Support Overhang Angle: 45.0 (Probably could've done something closer to 80-85)
• Support Horizontal Expansion: 0.8mm

Multi-Color Filament Settings for Cura

Go to Extensions > Post Processing > Modify G Code. From the "Post Processing Plugin" window that pops up, select Filament Change from the drop down menu. If option not listed below, leave unchecked:

• Enable: Checked
• Layer: 55
• Initial Retraction: 15.0mm
• Later Retraction Distance: 300.0mm
• X Position: 25.0mm
• Y Position: 150.00mm
• Z Position: 0.0mm
• Retract method: Marlin (M600 U)

Post-Printing

Support Removal

Very carefully use pliers or snips to rip off all the supports. The print should be rather sturdy so don't worry about breaking it.

https://buymeacoffee.com/infamousjoeg

Added a lip to the horizontal shelf to prevent items from shifting off.