64mm Oil Filter Wrench

Needed an oil filter wrench for my Indian Chieftain. Reading online noted it was very difficult to find an actual 64mm wrench (most are 64.7 which is too big to remove the filter). Found garyfain's model but wanted something that I could print without needing support so made this remix. 

I've printed it using ABS and Voron's PIF settings

• 5 top and bottom layers
• 4 walls
• 0.4mm nozzle
• 40% infill

I'm sure this would work for any application needing a 64mm oil wrench - sharing stp file if any adjustments are needed.

Update - extended the depth slightly (model is up to date) - the unexpected upside of the ‘dimple’ in the center is it makes it much easier to separate the filter from the socket as you can ‘roll’ it sideways and provides some leverage to release.

wanted something that I could print without needing support so made this remix.