Kiryu-Kai Plaque + Badge

Wall plaque of the Kiryu-kai logo.

The plaque is 175x175x5 mm so it should print on most printers, I printed it on my Prusa Mini. Color change should be inserted at 3.2 mm if you want.

The original button is 65x65x2.6 mm and has a small indent in the back to glue a badge holder to. This one requires turning on thin wall settings in Cura and PrusaSlicer, but should probably not be used since the V2 is better. I'm only leaving it here for legacy purposes.

The V2 buttons come in two sizes: the standard button is 65x65x3 mm, and the larger one with text on the front is 86x86x3 mm. The standard one comes either with the rear hidden text or without it. The bigger size only has one version.

Support Coco with official goods here: https://www.geekjack.net/kiryu\_coco/language/en

Print Settings

Printer Brand:

Prusa

Printer:

I3 MK3S

Rafts:

No

Supports:

No

Resolution:

.2

Infill:

15

Filament:
Fillamentum PLA Vertigo Starlight

Notes:

Base is in Fillamentum Vertigo Starlight PLA.

Logo is in Polyalchemy Copper Elixir.

The smaller V2 buttons were printed in MatteForge Blue PLA as a test, and the bigger set was printed with Sunlu carbon fiber PLA with Polyalchemy Copper Elixir.

Category: Signs & Logos