Galaxy S23 Ultra - Razer Junglecat case

This makes it possible to use your Galaxy S23 Ultra with Razer Junglecat controller. The original design is very variable and can be customized, so I measured my Galaxy S23 Ultra and through multiple iterations I finally reached a version I'm satisfied with.

I used layer height 0.2, printed with PLA. I used the speed preset with input shaper and it printed really well in just an hour.

There's a presupported version which doesn't need any other supports. There's also a version without supports where you need to do the supports manually.

Customizing using OpenSCAD

This is not necessary if you just want to print the case

To customize using OpenSCAD, you need:

1. OpenSCAD
2. The original Cuttlephone source code
3. Download the phone_case.zip file here from Files and extract the JSON file
   1. Put the JSON file in the same folder as the Cuttlephone source code and replace it
4. Open the file phone_case.scad in OpenSCAD and in the customizer choose Galaxy S23 Ultra
5. Customize the parameters in the customizer to your liking
6. Render (F6) and export (F7) the resulting STL
7. ???
8. Profit

This model adds the Galaxy S23 Ultra to the supported versions.