Esp32 camera for MK4 with different fixings (with FreeCad file)
Using the different pieces it is possible to place the camera in different places as shown in the photos.
60
349
10
1313
updated June 12, 2024
Description
PDF2024/06/12 Update: Added the piece that allows the camera to be attached directly to the X axis motor.
To place the camera, in addition to the box that protects it (capuchonSuperior and capuchonInferior), It will be necessary to use the unionX, the bielaA and the bielaB. Then, depending on where you want to place the camera, a joining piece with the printer structure will be used. See the photos.
Pieces A and B have two different lengths and three different heights.
Printed with a 0.4mm nozzle and in PLA.
Layer height 0.2mm
Tags
Model origin
The author marked this model as their own original creation.
