Airbus A320 Series Engine Start Switch

This is an Engine Start Switch lever for an Airbus A320 or similar. To be used with a MTL 206PA Knitter Switch or similar products. Great for home cockpits or other simulations.

Overall length is 45mm.
The top front part (for labeling) is 20mm by 20mm.
I made 4 different versions with different mounting holes for different switches:

• 3mm hole at 8mm depth
• 4mm hole at 8mm depth
• 5mm hole at 12mm depth
• 6,5mm hole at 12mm depth

Printed upside down for a smooth top surface, no support needed.

Designed with Fusion 360, measurements and proportions are guessed from photos and videos.