Palladium Arc Reactor MKII For LED Lamp 001 Kit
Description
This is an Arc Reactor model for the Bambu Lab LED Lamp 001 kit (EU/US/UK/AU/CA/JP/Global) that you can build in the comfort of your own home without being surrounded by terrorists in a dirty dark cave.
This model is also available for free here on Makerworld, but by buying it here you are supporting me as a creator and Printables as one of your favourite model sites. Note that any purchase here just includes the model to print and you need to source the LED lamp yourself.
Assembly
| Insert the LED Lamp 001 kit into the base with the cable into the cut-out pictured on the right. |  |
You will see ten indentations around the blueish piece, this is where the coils are held. Angle the coils as pictured and place the correct edge in an indentation and snap it over into place. |  |
| It should look something like this when done. |  |
| In the middle section, note the four supports that have bumps on them like the one highlighted in blue to the right. |  |
| Also note the 4 vertical indentations leading up to the horizontal gap in the blue piece. These are to make insertion easier. |  |
| Align the indicated bumps and indentations and push into place. |  |
Once it has been inserted, carefully rotate the blue piece a little so that the indentations are no longer aligned with the bumps. Also, use this as an opportunity to push any coils that have become unsettled into place before the next step. |  |
| Note that the inner side of the coils has an edge which sticks out. The goal is to push the ring in the final step in, bending this part back temporarily so it snaps into place. I have done four of these in testing and none have broken yet… |  |
I have tried to do this a few ways and it is easier to insert one side in first, poke around the inserted edge on either side then push the rest in. Once you have pushed it in, poke the coils a bit so they settle in their final resting place. |  |
| Now screw the assembled top onto the base. Congratulations, you now have a working arc reactor! |  |
Tags
Model origin
The author marked this model as their own original creation.
