Flipper Zero NRF24 + ESP32 Case MMU

Built to suit the wifi multiboard found on Aliexpress:

https://www.aliexpress.com/item/1005006124147669.html?spm=a2g0o.productlist.main.41.645563363g9SjJ&algo_pvid=b75e1b3f-c15d-4660-9303-abef10498d22&algo_exp_id=b75e1b3f-c15d-4660-9303-abef10498d22-20&pdp_npi=4%40dis%21AUD%2140.94%2126.61%21%21%2126.28%2117.08%21%402103011617117992452378885e701a%2112000036164294977%21sea%21AU%210%21AB&curPageLogUid=y8u5ONdP4PHm&utparam-url=scene%3Asearch%7Cquery_from%3A

Printed in PTEG at 0.15mm layer height.

Colors used are black, white, orange, and clear.

4x perimeters with 40% infill.

Supports on build plate only.

Uses 2x M3x16 CHCS.

Make sure you Flow setting are dialed in or the switch and button wont fit.

I used Posterboards model files of the Flipper logos, go and show them some love:

https://www.printables.com/model/264850-flipper-zero-logos/files