Goku Support Free Remix

This is a support-free, FDM-friendly remix of the Goku model by 3DDesigner
Original Model: https://thangs.com/3DDesigner/Gokustl-23498
No supports are required anywhere in this remix and it can be printed very easily. Check out the 3D print timelapse to see it in action - https://youtu.be/IltMI1uUscU

Follow me for more cool, support-free 3d printing timelapses on:

YouTube: www.youtube.com/robin3dverse
Instagram: @robin3dverse

Print and share your prints on Instagram!
You can credit my remix via @robin3dverse and tag me!

---------------------------------------------------------------------------------------------------------

3D PRINTING SETTINGS

Slicer: Cura 4.9.0
Layer Height: 0.2 mm
Wall Line Count: 3
Infill: 8%, Gyroid
Print Speed: 30 mm/sec
Z-Hop: 0.3 mm
Z-Seam: Back-Left
Supports: No
Raft/Brim: Optional

Print Time: 8 hrs 31 min
Dimension: 75.14mm x 47.57mm x 160mm
Weight: 39 grams
---------------------------------------------------------------------------------------------------------

Checkout my other two support-free remixes of Goku:

Kid Goku: https://www.prusaprinters.org/prints/82536-goku-kid-support-free-remix 

Goku Fight Pose: https://www.prusaprinters.org/prints/76966-goku-fight-pose-support-free-remix