StealthBurner for VzBot

This is a mounting solution for the Voron StealthBurner on a VzBot.

I modified the EVA 3 mount and aligned the belt paths for the VzBot gantry. I made a front adapter plate to hold a Voron StealthBurner toolhead. 

Why, you may ask? Because I wanted to, and I can, and I don't care what the VzBot purists think.

I slightly modified the CW2 motor plate, removing the extra material at the bottom that interfered with my mounting plate. If you already have a CW2 printed you can probably trim some of the extra material with a hobby knife to make it fit without reprinting.

The front belts attach the same as the VzBot toolhead, the back attachment is the same as EVA 3 with M5x40 bolts for tensioners.

I have 2 versions included, 1 for BTT Microprobe, and the other for Cartographer (probably works with Beacon and IDM probes also but I haven't checked) Low Profile version. There is also a mounting spot on both for the stock Tronxy endstop for X. For Cartographer please add washers as spacers between the probe and the mount.

I have included the .step files for both versions so you can easily modify it for other probes or to fit your needs.

Pick the Bottom and Front mounts for your desired probe and the rest of the parts are the same for both, you will need 2 belt tensioners either way.

You will lose some build volume with the SB toolhead over the standard VzBot toolhead, it's also heavier so you will lose some speed and your input shaping results won't be as good. However, surprisingly it does work pretty well for what it is and if you need /want SB this seems to be a good way to do it.

GLHF and to all the haters a giant :P~~

Modified EVA 3 to mount Voron Stealthburner with VzBot belt paths.