Gaggia New Classic Drip Tray small

This is a smaller version of the original drip tray of the Gaggia New Classic. 
I decided to design my own because my cups did not fit with a scale. 
 

For the Material i used ABS for the final version to fulfill the higher temperatures that could get close to 100°C. My first attempts with PLA and PETG does also work but they are not as suitable as ABS for this temperatures. Probably they will leak at some point and the Surface of the bottom part will get wavy.

The little knobs a the backside for the positioning of the drip tray i separated them to print them separatly

At the top part i used a smaller layer hight to geht a smoother radius at the front. 

For me a layer hight of 0,16mm for the standard print and a flatten to 0,08mm for the top few millimeters is perfect.

Print Settings 

Printer: 

Bambu Lab A1

Brim:

No
 

Supports:

Not necessary
 

Resolution:

0,16mm 

Top part with variable layer hight to smooth the edges
 

Infill:

15%
 

Filament:

GIANTARM ABS+
 

Filament color:

Black
 

Filament material:

Preferred ABS+