Cascade Wallet V2 (Assemble after printing)
Assemble after printing version of the print in place v2 Cascade Wallet
406
1277
18
7994
updated March 15, 2025
Description
PDFAn assemble after printing version of the print-in-place Cascade Wallet v2, to allow for multi color or multi material components.
Like the original, the shell is printed upright
The handle can be printed on end or on edge with supports for the cross extrusion.
Button cap and fan require no supports
The cross cutout in the fan part is deliberately tight. I file the interior corners (which tend to become rounded) slightly to get a good press fit.
Changelog
| Date | Description |
| 2024-05-01 | Added assemble after printing model based on RyanK's Adjusted Spring Corners mod |
| 2024-04-05 | Added ‘tighter’ versions of fan and shell. Fan is slightly wider to reduce space between shell and fan. Shell has slightly reduced hole diameter for the lever to reduce play in X/Y directions, and fixed minor geometry issue related to mesh editing. Both of these changes are designed to reduce part “rattling", since tolerances can be tighter for assembled parts than for print in place. |
Tags
Model origin
The author remixed this model.
Cascade card wallet V2 (Print-in-place)
Original model was switched to draft or deleted
Differences of the remix compared to the original
Modification of the V2 cascade wallet design with the following changes:
- Filled hole at bottom of outer shell used for the fan normally
- Split fan, handle, and button cap into separate objects
- Slightly reduce depth of circular insert on handle for clearance
- Add cross extrusion to handle to rotate fan part
