I call it the tabletop hex stand! Display items on your desk by giving them a lift and a cubby to go in!
It is a hexagon that is 200mm wide and 173mm tall in total, but each side is 100mm wide and 125mm deep. The hex is 6mm thick.
I have uploaded two versions, one long (125mm deep) and one short (75mm deep).
Print the structure going up, I ended up doing 2mm walls with 40% infill. Use a brim if you have poor bed adhesion. I printed in Polymaker PolyLite PLA Pro LM Sparkle Green and it is quite strong!
The author marked this model as their own original creation.