Background/Print directions: I created this insert to fit inside the Battletech Encounters box. I printed a couple iterations of the design using both PETG and PLA. All prints were done on a 0.4 nozzle with input shaping and at a 0.2mm layer height. No supports are needed. I used a 10% triangle OR adaptive cubic infill.
Card Sleeves: The card slots fit sleeved cards, but none of your cards need to be sleeved for them to fit, they're just a bit more loose if they're not sleeved. For the oversized cards, I used sleeves that were 91mm X 129mm, but you can go up to around 94mm X 137mm.
Updated April 17th, 2024: I added V2 models and kept the V1 models in case anyone likes those better. The V2 models have a little more space for sleeved cards and I made it easier to get the dice out. The downside of the V2 Upper is that it doesn't hold the C-Bill tokens as well when vigorously shaken. I may fix this with a V3 if there's interest in it.
Updated August 5th, 2024: I added V3 models and kept the V1 and V2 models in case anyone likes those better. V3 models fix the issues with V2 models and make pulling dice out easier. I also increased the size of the larger reputation token holder. V3 models should also be large enough to include an unannounced additional mercenary card.
The author marked this model as their own original creation.