Made a quick mount for adding LEDs to the camera case.
I used two 5mm white leds in parallel with some presoldered resistors, no idea of the value but should be easy enough to look up for anyone interested.
Added female JSTs to the ends for ease of hooking it to the 5v output on the board which has had a header soldered on the side that outputs volts and has the ground.
Sanded the bulbs on the LEDs to diffuse light and secured the LEDs with a drop of super glue each.
The author remixed this model.
Not really a remix but i took the measurements from the outside of the case to make it fit, added here for searchability and figuring out what it is intended for.