Laptop stand

Laptop stand designed for Dell 16" but can be used with other sizes and models.

My laptop is pushing air from the bottom side and to have a compact size it has small bumps on the bottom to allow air to flow. This usually is not enough. That's why I created a rugged stand with a fan option.

There are a three options for Connection Link: straight, straight with a fan mounting option and curved. You can choose any one you like.

You need to print following parts:

• Left Support x1
• Right Support x1
• Connection Link x2

You will also will need following fasteners.

• 8/12 x Screw M4x10 DIN912-A2/A4 (stainless steel socket cap screw)
• 8/12 x Nut M4 DIN934-A2/A4 or equivalent (stainless steel hex nut, Wd=7mm, Ht=3.2mm).

The assembly is straight forward.

Fan option links support 1 x 120x25mm fan.

Printing tips:

• Some parts require local supports.
• Because parts are large, please use brim on your discretion.
• I printed all parts from PLA but you can use any other material.