Shelf for IKEA Skådis

Shelf and frame in multiple sizes for IKEA Skådis pegboard. Snap fit, no supports or glue required.
18
59
0
390
updated March 28, 2024

Description

PDF

I remixed Ivan Urbánek's pliers holder to add a shelf. There are a few different sizes available, with and without a center divider. Like the original, there is an odd and an even version — if you want a continuous line of them on the pegboard, you need to alternate odd and even.

The shelf bracket should be printed upside down with the slanted top side against the printbed. The shelf should also be printed upside down, with the snap fit rim facing upwards.

The bracket prints in one piece and there are no separate peg components to be printed.

Once printed, the shelf simply snaps into place in the bracket. Because of the angled front, you'll need to insert the front side of the shelf into the bracket first.

For the version with the center divider, you should print two half shelves per bracket.

I printed it in Jessie PLA, but other materials should work fine. Tolerances might be off slightly in materials that shrink more though.

Tags



Model origin

The author remixed this model.

Differences of the remix compared to the original

Added a shelf.

License