The “Silly Stands” are Nerf blaster display stands for blasters using the Talon magazine geometry variants (Straight, Angled, Slim Angled)!
There are 6 versions. There are three types of mag (Straight Talon, Angled Talon, and Slim Angled Talon/Nightingale). Each type of mag has two versions, with the bottom “shoe” of the stand facing forward or backward.
Choose the version that will work best for your blaster's weight balance!
I recommend you print all these parts at 5 walls, 20% infill.
If you have poor bed adhesion/warping, a brim might be necessary.
Print the stand you like, and print the printed reinforcement bar.
Drip some glue into the hole on the bottom of the stand while holding it upside-down, then push in the bar all the way until it's flush with the bottom of the stand base.
If you like what I do, please consider supporting me!
I don't charge for my files, so any donations or merch purchases would be greatly appreciated!
Note: Thanks to Ice086 for recommending I call these “Silly Stands”!
The author marked this model as their own original creation.