Print at 100% infill with a layer height of 0.12mm with a base layer of 0.24mm
Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Green Transmission Distance: 1
PLA PolyLite Red Transmission Distance: 1.5
PLA PolyLite Orange Transmission Distance: 7.5
PLA PolyLite Lemon Yellow Transmission Distance: 6.5
PLA PolyLite White Transmission Distance: 5
Swap Instructions:
Start with Charcoal Black
At layer #3 (0.48mm) swap to Black
At layer #4 (0.6mm) swap to BLue
At layer #5 (0.72mm) swap to Red
At layer #6 (0.84mm) swap to Orange
At layer #10 (1.32mm) swap to Lemon Yellow
At layer #14 (1.8mm) swap to White for the rest..
EN - Thank you for liking my model. I just ask that you follow me, nothing more, thank you and I will do the same.
PT - Obrigada pelo o like no meu modelo Eu só peço para me seguirem nada mais obrigada e eu farei o mesmo.
FR - Merci d'aimer mon modèle je vous demande juste de me suivre, rien de plus, merci et je ferai de même.
The author marked this model as their own original creation.